Roof Pro Brisbane
Roof Pro Brisbane
Roof Pro Brisbane

New Roofs Process

Stage 1

Confirm all paperwork is correct including all colours and profiles as selected. Colour samples can be provided by Roof Pro if Required.

Stage 2

Site measure is done at earliest notice by builder and or owner. i.e. As soon as trusses and or rafters are erected.

Stage 3

Inform builder and or owner of start date for Fascia and Gutter, Battens and Roof. Notification will also be made of Material delivery times. (Platform supplied and installed if required)

Stage 4

Install Fascia and Gutter. Any questions regarding the installation of the fascia and gutter as they may arise will require the site supervisor or builder either to be contactable or on site to answer these questions.
 

Stage 5

Install 40mm Top Hat metal battens. All battens are installed at 900mm centres. Safety battens are required on any application where the trusses and or rafters are spaced at more than 600mm centres.
 

Stage 6

Install Roof sheeting and all associated components. i.e. Ridge Caps, flashings, Barge caps, screws, rivits etc.

Stage 7

Clean roof of all debris. Appropriately disposing of into bin supplied by builder and or owner. Roof Pro contractors ensure the site is left clean of any debris that was caused by Roof Pro contractors.

Stage 8

Confirm with builder and or owner that all work that can be done is completed to satisfaction.

Stage 9

Inspection from Roof Pro supervisor if required.